2010 F150 evap temp. sensor
Thread Starter
|
Freshman User
Joined: Mar 2008
Posts: 33
Likes: 0
From: Adrian
2010 F150 evap temp. sensor
I sent my 2010 F150Screw 4x4 to figure out why A/C would not cool and was told the evap temp. sensor was bad,and told it was "non-replaceable"and I would need a new HVAC box from Ford installed to get my a/c working to the tune of $1493.13 (oh and I should get my h/core changed since they would have the dash out anyway)only charge me for core. Any advice or help would be appreciated. is this the only option for fixing a/c, thanks Randall
Hotshot
Joined: Jan 2004
Posts: 19,760
Likes: 1,078
From: St Louis
The factory service manual states:
Now, that was published in 2012, perhaps things have changed since then. It appears that the sensor is individually replaceable starting in the 2011 MY. Unless there is an aftermarket alternative (you'd likely have to have the work done elsewhere) or there is a new replacement sensor, the dealer's assessment is correct.
The evaporator temperature sensor is not available as a separate component. To install a new evaporator temperature sensor, a new heater core and evaporator core housing must be installed
Thread
Thread Starter
Forum
Replies
Last Post
smittyranger1993
1983 - 2012 Ranger & B-Series
2
May 5, 2004 09:39 PM
