April is here
Post Fiend
Joined: Jun 2014
Posts: 6,801
Likes: 7
From: DFW, TX-GoldCanyon, AZ
GOOOOOOOOOD SATURDAY MORNING MINNESOTAAAAAAAAAAAH!!!!!!!!!!
Hot coffee with Italian Sweet Creme on the counter... Yes, there's also warm Danish and of course we have blueberry bagels!
This is just for starters as we're gonna have some banana flapjacks with maple syrup a ittle later on...
Enjoy your days folks!!!
Hot coffee with Italian Sweet Creme on the counter... Yes, there's also warm Danish and of course we have blueberry bagels!
This is just for starters as we're gonna have some banana flapjacks with maple syrup a ittle later on...
Enjoy your days folks!!!
Lead Driver
Joined: Apr 2003
Posts: 9,965
Likes: 1
From: H-town, MN
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Well finally got to hook the trailer up to the new truck. Went and picked up our new camper last night! It's a 1966 Serro Scotty. Got it pretty darn cheap! haha Should be a fun project.
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Thanks! Not worried about dry rot. Plan on replacing all the wood anyway.
Fleet Owner
Joined: Mar 2007
Posts: 28,290
Likes: 6
From: BLT, MN
Good evening guys.
A big thanks to Dave. It was a heck of a project but we finally managed to get the swing arm off the bike and the pivot bolt out. Now to start sourcing parts and labor. Maybe a driveshaft rebuild and the rear drive unit rebuilt.
A big thanks to Dave. It was a heck of a project but we finally managed to get the swing arm off the bike and the pivot bolt out. Now to start sourcing parts and labor. Maybe a driveshaft rebuild and the rear drive unit rebuilt.