Now that's just braggin', Nick!

 

An 8N couldn't do that, huh, Nick!

 

I will make 3 that use a Cub. It has continuously plowed my driveway since 1978. Most like mine had hydraulics which works well plowing, no power angle however I only change angle once or twice when plowing. I originally mowed my lawn with it with an underslung bush hog. I rebuilt the engine about 25 years ago and converted to 12v. It just runs and runs. I like it for it's size and manuverability.

 

My friend RC uses an 8N to move stuff around, but I use my shop truck. To go back and answer an old question, we used a riding lawn mower to push cars around at one of the shops I was at, but we had to weld the differential to get enough traction to pull a car.

 

I don't think so haha! hat truck was a pain to get on the trailer because the yard manager at the place i bought it from decided o move it with a fork lift, and bent the drive shaft and running boards.

 

This is what I use .
Could not live without it . I have an 8n also , but she needs work . Pulling , pushing , yard work , garden .... So many uses .