Re-Calibrating Speedometer??
Elder User
Joined: Sep 2011
Posts: 979
Likes: 4
From: Vancouver
Mr Kovalsky, Thank you for that insightful explanation about the speed sensor. This forum is just full of little bits of information ready for us to learn because of folks like you. Thanks for sharing the info in bite size morsels over the years!
Larry
Larry
Thread Starter
|
Lead Driver
Joined: Feb 2000
Posts: 5,374
Likes: 46
From: Palm Bay, Florida
Mark, Would you think a complete rear axle assembly from a 2011 Ranger (with disc brakes!!) would still be a plug and play?? is the VSS on the rear end like our SDs?
Also, Any idea what I'd need to do to the brake system to swap in a disc brake rear and have them work properly? Thanks!
Also, Any idea what I'd need to do to the brake system to swap in a disc brake rear and have them work properly? Thanks!
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
The brake vacuum boosters and master cylinders are different between the two years. Brake master cylinders for discs have larger volume pistons to accommodate the larger volume of the calipers vs wheel cylinders. There may be some plumbing issues associated with this at the master cylinder. This would also affect brake proportioning and ABS modulation.
Thread
Thread Starter
Forum
Replies
Last Post
50Cobra
1983 - 2012 Ranger & B-Series
2
Nov 2, 2001 02:56 PM
