Headlight retainer
Thread Starter
|
Senior User
Joined: Sep 2012
Posts: 222
Likes: 0
From: Jacksonville
Headlight retainer
Where do you buy or is it needed a gasket ( cork I believe ) that goes between the headlight and the headlight retainer ring? Have found tractor ones online but nothing specifically for my truck.
Also are the bolts that hold the 3 teeth to the headlight bar 1/4 20 or 1/4 28 ?
Thanks,
Oscar
Also are the bolts that hold the 3 teeth to the headlight bar 1/4 20 or 1/4 28 ?
Thanks,
Oscar
Hotshot
Joined: Oct 2009
Posts: 16,188
Likes: 4,792
From: Burbank, WA
If by headlight you mean the actual sealed beam bulb, and by retainer ring you mean the thin stainless ring that holds the sealed beam to the adjusting bucket, then afaik there is no gasket there of any kind. The only cork gasket I'm familiar with is between the lamp bucket housing and the body.
Thread Starter
|
Senior User
Joined: Sep 2012
Posts: 222
Likes: 0
From: Jacksonville
I thought i saw somewhere a thin cork gasket that went between the sealed beam and the retaining ring. There is also the gasket for the bucket you wrote about. If the re is not the one I`m referring to then I have everything I need. Do you know about the bolt sizes for mounting the teeth?
Thanks,
Oscar
Thanks,
Oscar
Lead Driver
Joined: Jul 2011
Posts: 6,599
Likes: 34
From: Rockingham, VA
Thread
Thread Starter
Forum
Replies
Last Post
Bob's49
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
Jan 10, 2018 07:10 AM
