right angle fitting for power steering pump
Thread Starter
|
New User
Joined: Jan 2015
Posts: 6
Likes: 0
right angle fitting for power steering pump
I have the older style power steering pump with the skinny dipstick. I guess it's a Ford pump. Anyway, the PO put on headers, and there wasn't enough clearance between the rearward exiting hose and the headers, so he bent and used a way-off spacer setup (15 degrees maybe?).
So, before I go out with the caliper counting threads, I was hoping someone had a line on a right-angle fitting I could use on the fitting coming out of the back of the pump.
Thanks.
So, before I go out with the caliper counting threads, I was hoping someone had a line on a right-angle fitting I could use on the fitting coming out of the back of the pump.
Thanks.
Fleet Owner
Joined: Dec 2009
Posts: 20,678
Likes: 83
From: NorCal
Thread
Thread Starter
Forum
Replies
Last Post
1949f1
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Nov 7, 2017 03:38 AM
allwthrrider
Brakes, Steering, Suspension, Tires, & Wheels
1
Apr 22, 2011 10:57 PM
