When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've got a light mount, led light bar & 6 pod lights that I would like assistance with installing when they arrive: I've installed plenty of lights before, but with the upfitter switches...not so much. I'm a hands on learner & although quite intelligent, sometimes have a difficult time puttingwritten instructions/electrical diagrams to use.
any assistance one might be able to provide would be met with great beer & conversation
Depending on what brand of lights you got it should come with all the wiring, I know Rigid does.
If not then could you post a picture of the wiring diagrams that come with the lights?
thanks: I got it figured out: if anyone didn't know & wants to:
1) black wire to negative terminal of battery
2) red to pass-through wire in engine compartment
3) opposite end of same color "pass through wire" to upfitter switch wire
off-brand 180W LED light bar on an N-Fab light bar with multi-mount. there are 6 more "pods" that I'll be installing, but they're still in transit: at least I"ve got a little more light for our logging road travel tomorrow evening
this first shot is nothing...just the lights from a local business & a street ligh
Now we move into the "low beams only shot
High beams
off brand 28" (60 LED's) 180W Led light bar - spot/flood combo. I've still got a bit of aiming to do, but that comes this weekend
