99 f250 axle problems
Thread Starter
|
New User
Joined: Dec 2014
Posts: 1
Likes: 0
99 f250 axle problems
Guys I apologize if I'm in the wrong section. That being said. I have a 99 f250 7.3 4x4. The problem is in 2wd I can spin the front drive shaft freely and the driver side axle will turn but not passenger side. I've pulled both hubs off and both are in auto position and spin freely. Even with the hub off on the pass side the axel won't spin freely. Any help would be appreciated. Thanks
Last edited by tnco-op; Dec 5, 2014 at 06:55 PM. Reason: spelling
Mountain Pass
Joined: Oct 2006
Posts: 164
Likes: 13
From: Arizona
The front is an open diff. It's normal to only see one side spinning while turning the drive shaft. Try spinning the universal on the passenger side. As long as it turns by hand then you shouldn't have anything to worry about.
Thread
Thread Starter
Forum
Replies
Last Post
madscientist
1999 - 2016 Super Duty
7
Feb 1, 2011 01:02 PM
