cruse problems
Thread Starter
|
New User
Joined: Nov 2014
Posts: 1
Likes: 0
cruse problems
ok guy i have a big cruse problem , i have replaced the stop sensor in side the master cylnder sensor the clutch switch the tps , every fuse and cheaked every relay replaced the switches and clock spring . i have not replaced the speed sensor . any other ideas i need to fix this yesterday , i have a knee surgury comming up and have to have it for the 3.5 hour ride home . 2001 ford 7.3 425hp southbend clutch drilled head fuel banjo bold and 90 psi fuel spring . 5th wheel / goose neck hitch and 100 gallon aux tank and 13 gpm pump 
Last edited by IB Tim; Nov 6, 2014 at 06:05 AM.
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
It's usually the clutch pedal position switch. Have you got access to a scanner that can run tests on the 7.3? There's a switch test you can run that will pinpoint your problem. I know Auto Enginuity can run the switch test.
Thread
Thread Starter
Forum
Replies
Last Post
bigreddieselco
1994.5 - 1997 7.3L Power Stroke Diesel
5
Mar 8, 2009 05:05 PM
econolow
1999 - 2003 7.3L Power Stroke Diesel
4
Aug 28, 2008 08:26 PM
eyyu
1994.5 - 1997 7.3L Power Stroke Diesel
4
Jun 13, 2006 08:00 PM
