No reverse unless I shift to drive first
Thread Starter
|
Fleet Mechanic
Joined: Feb 2008
Posts: 1,955
Likes: 6
From: Eastern PA
No reverse unless I shift to drive first
Finished my flush, but now it won't shift to reverse unless i shift all the way to drive first. I thought it might be the hard shifting lever(i think something is up with the linkage), so i shifted to neutral, then reverse, but no success. It's still about 1/4-1/2" overfilled, I jsut ran to the hardware store and it's consistently still not shifting to reverse unless I take it all the way to drive first.
Really hoping I didn't break something in the process...
Edit: I did do the shifting through the gears while it was flushing out the old coolant, could the valve be stuck due to that?
Really hoping I didn't break something in the process...
Edit: I did do the shifting through the gears while it was flushing out the old coolant, could the valve be stuck due to that?
Thread
Thread Starter
Forum
Replies
Last Post
