Smart Junction Box
Thread Starter
|
New User
Joined: Jun 2014
Posts: 1
Likes: 0
Smart Junction Box
2008 F250 Superduty Lariet
I stared noticing that my back drivers side power window switch wasn't working. Heard sparks snapping the wiring knuckle (rubber boot) between the door and the body.
(I must mention I am an electronics technician, but my specialty is not automotive)
When I opened the boot, I found melted wiring. I was able to repair, solder and shrink tube the wiring and save it.
Window started working fine.
Once I got into the truck I could smell electrical burning smell.
While the wiring was arcing inside the boot, it did something to the relay for the power lock system. The smell was coming from the smart junction box.
My question is: Can these be opened up to expose the relays/junctions?
Thanks in advance
I stared noticing that my back drivers side power window switch wasn't working. Heard sparks snapping the wiring knuckle (rubber boot) between the door and the body.
(I must mention I am an electronics technician, but my specialty is not automotive)
When I opened the boot, I found melted wiring. I was able to repair, solder and shrink tube the wiring and save it.
Window started working fine.
Once I got into the truck I could smell electrical burning smell.
While the wiring was arcing inside the boot, it did something to the relay for the power lock system. The smell was coming from the smart junction box.
My question is: Can these be opened up to expose the relays/junctions?
Thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
damarble
1987 - 1996 F150 & Larger F-Series Trucks
7
Mar 16, 2014 02:17 PM
faded_camo
1987 - 1996 F150 & Larger F-Series Trucks
7
Aug 24, 2009 01:00 AM
