anyone from co?
Cargo Master
Joined: Sep 2012
Posts: 3,061
Likes: 39
From: Laramie, WY
I think you can get more troubleshooting help if you post this question in the correct truck section.
If you've replaced all that equipment, you still might need a new master cylinder. I need a better description of what you mean by 'no stop'. Does the pedal go to the floor?
If you've replaced all that equipment, you still might need a new master cylinder. I need a better description of what you mean by 'no stop'. Does the pedal go to the floor?
Thread Starter
|
Freshman User
Joined: Feb 2014
Posts: 25
Likes: 0
From: pueblo, co
The master cylinder is also new. The pedal is solid when truck is not running. Once I start it, the pedal goes to the floor and returns slowly. I was told to loosen bleed screw and allow to gravity flow. Im at a loss as what to do next
SPONSOR
Joined: May 2013
Posts: 3,126
Likes: 0
Welcome to the forum and good luck with your truck. 
Torklift Sheryl
Torklift Sheryl
__________________
Torklift International – Towing, Suspension, Tie Downs, Steps
Call me direct: 1-800-246-8132
Visit our Blog: http://www.torklift.com/blog
Torklift International – Towing, Suspension, Tie Downs, Steps
Call me direct: 1-800-246-8132
Visit our Blog: http://www.torklift.com/blog
Thread
Thread Starter
Forum
Replies
Last Post
