door swap

Reply Subscribe

Thread Tools

Search this Thread

May 18, 2014 | 07:24 AM

mr lucky

Thread Starter

New User

Joined: Jan 2014

Posts: 7

Likes: 0

door swap

Re: 1993 f150
If I swap a door with manual windows to door with electric,are any modifications involved swapping regulator and motor ect to manual door

May 18, 2014 | 07:36 AM

Diesel_Brad

Fleet Owner

Joined: May 2009

Posts: 21,437

Likes: 76

From: Gilbert, PA

no. Everything is a direct bolt in
hardest thing about it all is cutting the rivets that hold the original stuff in

May 18, 2014 | 07:18 PM

Eddiec1564

Cargo Master

Joined: Mar 2007

Posts: 2,935

Likes: 34

From: Arcadia, Fla

If you have the aluminum rivets, just knock out the rivet center post with a punch and use a good metal chisel to knock the head off. If you have the steel rivets, then your going to have some fun drilling the heads off as the tend to spin instead of drilling out.

I had a truck with one door aluminum rivets and the other were steel. I wound up grinding the heads off the steel rivets....