Bed value question
Thread Starter
|
Senior User
Joined: Jan 2013
Posts: 303
Likes: 0
I got a 1979 f150 that I'm considering parting out. The bed that's on it is off a 73-76? I think and I was wondering what the value of it would be. I got a bed side for the drivers side that is for a 78-79 truck and a bed floor insert for it as we'll. As you can see the floor that is in it Currently is rusted out and the drivers side bed side has a lot of bondo on at the end. The back peace toward the cab would need replaced. Unfortunately don't have that piece. With all that in mind what would be a good asking price?
FTE Legend
Joined: Sep 2003
Posts: 54,049
Likes: 2,419
From: NY and VA
I bought a 79 bed in VA for $350. Good floor, great tailgate, but, needs wheel arch and rear corner (underneath tail lights) replacement. I know a guy in NY who has been trying for years to get $850 for his that needs rear corners.
Mountain Pass
Joined: May 2013
Posts: 141
Likes: 0
From: Reno NV
To be honest, If I were in your shoes, I would pull all of the trim off, tailgate off, storage compartment, emblems etc...and sell those seperate, then take the bed shell to a scrap yard. Then sell the replacement panel(s) you already have, seperately. The bed itself is in horrible shape and I dont think it would bring you much other than a headache waiting for it to MAYBE sell. I honestly think there is more value sitting there in trim pieces than the entire bed itself.
Mountain Pass
Joined: May 2013
Posts: 141
Likes: 0
From: Reno NV
I hear ya, And Im not saying Im right either, just my take on it 
The floor is shot, so if you dont want to scrap it I would recommend taking it apart, getting rid of the floor and selling the bedsides and everything else....The rusted through floor is going to turn a lot of people, looking for an intact bed, away. So I would target the replacement panel market if it were me. it also makes it easier to sell and possibly ship parts as opposed to an entire bed...so that would potentially open up the possibilities outside of local sale/pick up.
I would think that passenger side bed side would potentially be a hot ticket item for someone wanting to add the storage compartment to their truck...just speculation
The floor is shot, so if you dont want to scrap it I would recommend taking it apart, getting rid of the floor and selling the bedsides and everything else....The rusted through floor is going to turn a lot of people, looking for an intact bed, away. So I would target the replacement panel market if it were me. it also makes it easier to sell and possibly ship parts as opposed to an entire bed...so that would potentially open up the possibilities outside of local sale/pick up. I would think that passenger side bed side would potentially be a hot ticket item for someone wanting to add the storage compartment to their truck...just speculation
Cargo Master
Joined: May 2010
Posts: 3,365
Likes: 12
From: NW Indiana
I could get $500 pretty easily for that bed and parts. Other than the toolbox and the trim on it I don't see the reasoning behind parting and scrapping.
Bottom Line...what is your location? That determines what you should expect.
Bottom Line...what is your location? That determines what you should expect.
Thread
Thread Starter
Forum
Replies
Last Post
RustyTank
1973 - 1979 F-100 & Larger F-Series Trucks
30
Feb 9, 2019 09:20 AM
jason867
1973 - 1979 F-100 & Larger F-Series Trucks
3
May 29, 2008 07:42 PM
sparky30_06
1948 - 1956 F1, F100 & Larger F-Series Trucks
14
May 3, 2007 06:30 PM
Cracker289
1967 - 1972 F-100 & Larger F-Series Trucks
9
Nov 27, 2004 10:14 AM
