6.0 p1102 code
Thread Starter
|
Senior User
Joined: Aug 2006
Posts: 333
Likes: 0
From: Roseburg, Or
I see no broken wires. Ill get the pcm plug that has the maf wires? If i understand correctly i should also check fuse 22 under dash?
Senior User
Joined: Dec 2005
Posts: 126
Likes: 0
From: NJ
How'd it go with the new MAF sensor? Simple enough to check Fuse 22. My problem is finally fixed and no more P1102! I had one of the filter minder wires crossed with the MAF signal return wire. I was starting to think it was the PCM and cost me a few hours of troubleshooting. Time for new glasses.
Lead Driver
Joined: Sep 2012
Posts: 7,833
Likes: 96
From: Manteca,Ca
How'd it go with the new MAF sensor? Simple enough to check Fuse 22. My problem is finally fixed and no more P1102! I had one of the filter minder wires crossed with the MAF signal return wire. I was starting to think it was the PCM and cost me a few hours of troubleshooting. Time for new glasses.
Thanks for posting the out come
Thread Starter
|
Senior User
Joined: Aug 2006
Posts: 333
Likes: 0
From: Roseburg, Or
havent got a new MAF yet. Replaced the filter minder, air filter, checked all wiring, cac hose, and cleaned maf. Still getting p1102. I guess ill bite the bullet and get a new MAF.
Thread
Thread Starter
Forum
Replies
Last Post
M-S-G
1999 - 2003 7.3L Power Stroke Diesel
22
Aug 15, 2016 10:11 PM
Restlesswildman
6.0L Power Stroke Diesel
9
Jun 26, 2016 10:17 PM
PirateGhost
Clutch, Transmission, Differential, Axle & Transfer Case
4
Sep 27, 2011 08:26 PM
