Dually RSK question?
Thread Starter
|
Posting Guru
Joined: May 2011
Posts: 2,303
Likes: 1
Dually RSK question?
I searched but couldn't really find the answer I'm looking for so figured id ask. I plan on doing a 2.25 PMF RSK in the front with U Code SD springs in the future, along with swapping on a dually axle and a flatbed. That said, there is a 02 SD F450 in the local junk yard right now. Would the rear dually springs be a good combo with the weight of the flatbed and would they work with an RSK as they're for a 450? Thanks guys.
Hotshot
Joined: Feb 2009
Posts: 10,408
Likes: 75
From: Plankinton, SD
If they are a 10 pack leaf like mine, just so you know, they are a rough ride empty. Decent roads are fine, but bad roads you will feel the bumps real good. I run them with no block, and the front end stock height. I have a slight rake, rear is a little higher. I'd guess if you use the rsk on the front that raises it about 2 inches you could use these springs and the 2 inch block in the rear and the height would be about right.
Again though, if you drive it empty much you may want to look at SD 350 springs and a 4 inch block for a smoother ride.
Again though, if you drive it empty much you may want to look at SD 350 springs and a 4 inch block for a smoother ride.
Thread
Thread Starter
Forum
Replies
Last Post
Big Ruth
1987 - 1996 F150 & Larger F-Series Trucks
4
May 25, 2010 04:30 PM
SupercrewzerV10
1973 - 1979 F-100 & Larger F-Series Trucks
16
Jan 8, 2008 03:54 PM
