gear shift lever insulator
Thread Starter
|
New User
Joined: Dec 2013
Posts: 22
Likes: 0
From: Cullman
gear shift lever insulator
I replaced my shift collar today on my '62 f100 (3 on tree) and figured I might as well replace the gear shift lever insulator as well. It appears that the one currently on there is part # B8S7246A. Is the correct replacement or should I use part # 01A7246B instead?
Thread Starter
|
New User
Joined: Dec 2013
Posts: 22
Likes: 0
From: Cullman
do both work for manual trans? from looking at mac's; 01A-7246-B is for a manual trans and B8S-7246-A is for an automatic trans.
I have a manual trans but the insulator I just pulled off was B8S-7246-A. So should I replace it with B8S-7246-A which is for automatics according to mac's or get the 01A-7246-B for my manual instead? Thanks.
I have a manual trans but the insulator I just pulled off was B8S-7246-A. So should I replace it with B8S-7246-A which is for automatics according to mac's or get the 01A-7246-B for my manual instead? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
coloradotrk
1967 - 1972 F-100 & Larger F-Series Trucks
26
Sep 4, 2015 09:46 PM
4EXTRDR
1999 - 2003 7.3L Power Stroke Diesel
2
Aug 21, 2011 08:30 PM
ytc
Clutch, Transmission, Differential, Axle & Transfer Case
6
Jan 25, 2006 09:02 AM
TRKR_MAN
Clutch, Transmission, Differential, Axle & Transfer Case
2
Mar 3, 2004 11:10 AM
