Problems Adding Up
Thread Starter
|
New User
Joined: Jan 2014
Posts: 13
Likes: 0
Problems Adding Up
A couple weeks ago I was at a stop light on a slight hill. When I went to drive my truck revved and started rolling backwards. I finally got in a safe place off the road and started up and tried again. Everything was fine until I got to the light and the same thing happened. This time after I couldn't get it started and got towed home. I figured my problem was my shifter coil so started some research on that. Was getting my truck started, my engine would change as I shift but not the transmission. I took a couple week break and when tried to start again nothing would happen at all. No crank no click nothing. I'm not sure if my coil is out or if I'm having starter relay problems. Anything at all I will appreciate.
9 ECHO 1
Joined: Aug 2009
Posts: 12,467
Likes: 58
From: Missouri
Is the gear indicator stuck between P and R? If so, the computer may THINK the truck is in reverse, preventing it from starting. Its a common and easy fix. It doesnt cause everything you describe, if I understand you correctly, but its a place to start.
Thread Starter
|
New User
Joined: Jan 2014
Posts: 13
Likes: 0
Yeah that was the first thing I though. A while back I checked it cold and there was fluid on the dip stick. Can't try it hot now because I can get it to start at all now
Trending Topics
4000 rounds a min
Joined: Apr 2010
Posts: 2,223
Likes: 0
From: Albemarle NC
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Thread Starter
|
New User
Joined: Jan 2014
Posts: 13
Likes: 0
I unbolted the transfercase shift motor and left the harness attached. I went and shifted the gears with the truck in on position and checked if the spindle was moving at all. It didn't move not sure if it should?
Thread Starter
|
New User
Joined: Jan 2014
Posts: 13
Likes: 0
I did so diagnoses on my starting prom. I ended up changing my neutral safety switch out and it started right up. I got the gears all in the right places. Now in all gears when I go to press the pedal my rpms go up like they should but no movement for 5-10 sec. I'm scared to drive far so I've been pulling 30 ft out of parking spot and back. Anything will really help out.
Thread Starter
|
New User
Joined: Jan 2014
Posts: 13
Likes: 0
I check all my fluids. The trans fluid I check after the truck warmed but couldn't drive anywhere, not sure if it needs to be driven to check. Was going to drain the the trans and see how much comes out. Change the filter and fill back up. Not sure if the computer needs to be reset.
Lead Driver
Joined: Sep 2005
Posts: 9,399
Likes: 188
From: Norco,CA
How many miles on the trans? Sounds like its time for a new one. Mine did the same thing wouldn't move, then would go, that lasted a week then know more trans. Fluid looked good just warn out in side. These trans are noted for it.
