81 stepside
Thread Starter
|
Freshman User
Joined: Feb 2013
Posts: 29
Likes: 0
From: Summerville
81 stepside
does any one have a wood bed kit or have a stepside with the wood bed that would b willing to sell just the wood and strips and cross members and bed mounting wood blocks.
Freshman User
Joined: Mar 2013
Posts: 38
Likes: 0
From: Rexburg
hmmm, good luck
I'm in the middle of building an 84 stepside. You're going to have to be very luck to find anyone willing to part with those pieces off of a good bed. Most of the ones I have seen are so rotten you don't want to mess with them, if you could even get them off intact.
I have gone to several difference places to find my replacements. Ebay is good for the metal parts. bed strips etc. Everyone will tell you lmc, but you might want to try Mar-k, Horkey's wood and parts. or bedwood and parts. Horkey's seem to have a huge variety of parts and accessories and prices are better than lmc. My bed walls and tailgate were in good shape to start with but I have had to completely rebuild everything else. (so glad I found a good metal fab place)
front and rear sills, the cross bars that support the wood, etc.
I haven't order any wood yet because I haven't decided what I want yet. I have a few friends with cabinet shops, it might be worth asking around to see if you can have someone local mill the wood for you. Saves you from having to pay for shipping on a 150 lbs of wood, and you can pick what you want. Take Some pics, i'm always up for seeing a well finished stepside.
I have gone to several difference places to find my replacements. Ebay is good for the metal parts. bed strips etc. Everyone will tell you lmc, but you might want to try Mar-k, Horkey's wood and parts. or bedwood and parts. Horkey's seem to have a huge variety of parts and accessories and prices are better than lmc. My bed walls and tailgate were in good shape to start with but I have had to completely rebuild everything else. (so glad I found a good metal fab place)
front and rear sills, the cross bars that support the wood, etc. I haven't order any wood yet because I haven't decided what I want yet. I have a few friends with cabinet shops, it might be worth asking around to see if you can have someone local mill the wood for you. Saves you from having to pay for shipping on a 150 lbs of wood, and you can pick what you want. Take Some pics, i'm always up for seeing a well finished stepside.
Thread Starter
|
Freshman User
Joined: Feb 2013
Posts: 29
Likes: 0
From: Summerville
ive been on the fence about fixing the stepside or getting a fleetside to replace it.
I would like to have the fleetside on the truck while I upfix the stepside.
I have all kinds of ideas about this truck ,but as with such things money is the issue.
I would like to have the fleetside on the truck while I upfix the stepside.
I have all kinds of ideas about this truck ,but as with such things money is the issue.
Freshman User
Joined: Mar 2013
Posts: 38
Likes: 0
From: Rexburg
I totally agree in the money thing. It has added up trying to piece this thing back together. I've been slowly gathering parts and been waiting till work slows down to really dig into it. Thats why I've spent some time shopping around and looking for deals. Don't want junk but I want some $ left over for the interior upgrades I have in mind. My truck had the original plywood in it. Yes, functional, but butt ugly, not to mention rotten beyond belief from the p.o leaving his garden waste in it to rot all winter long.
You can get white oak boards already cut and rabbeted on ebay for less than $300. Bedwood will sell you the same thing in exotic teak for close to $3000. My wife would make sure I was never seen again if I did that.
You can get white oak boards already cut and rabbeted on ebay for less than $300. Bedwood will sell you the same thing in exotic teak for close to $3000. My wife would make sure I was never seen again if I did that.
Senior User
Joined: Sep 2013
Posts: 102
Likes: 0
I bought my bed kit with the oak boards already cut and unfinished from ebay along with the stainless strips and bolt kit and they look and fit perfect. Here is the seller: bigbucks201
http://www.ebay.com/itm/Oak-Bed-Wood-Ford-F-100-Truck-Pickup-Floor-Parts-69-70-71-72-1969-1970-1971-1972-/360801712505?pt=Motors_Car_Truck_Parts_Accessories&hash=item5401753979&vxp=mtr
I put 10 coats of Marine Clear on each side (over about a two week period) of each board using EPIFANES Clear High-Gloss Varnish that I purchased from Amazon.com and it all came out great.
http://www.ebay.com/itm/Oak-Bed-Wood-Ford-F-100-Truck-Pickup-Floor-Parts-69-70-71-72-1969-1970-1971-1972-/360801712505?pt=Motors_Car_Truck_Parts_Accessories&hash=item5401753979&vxp=mtr
I put 10 coats of Marine Clear on each side (over about a two week period) of each board using EPIFANES Clear High-Gloss Varnish that I purchased from Amazon.com and it all came out great.
Trending Topics
Logistics Pro
Joined: Jan 2001
Posts: 3,789
Likes: 26
From: Connecticut
Mine will be the "original" marine plywood, Finished 1 side and painted, like the original, the blue metallic.
Bed kit wood, $300+
Marine plywood $65.
Bed kit wood, $300+
Marine plywood $65.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
Senior User
Joined: Sep 2013
Posts: 102
Likes: 0
That sounds sweet but I was going for a high end natural look and I don't mind paying a little extra to get a little extra. Guess it's all what you want to do with your truck. Mine is a restored beauty queen that lives in the garage and only comes out on sunny days.
Senior User
Joined: Apr 2011
Posts: 347
Likes: 7
From: San Jose, CA
I bought my kit here: MAR-K Classic Truck Parts made in Oklahoma City, USA
also bought there all the bolts and bed mounts.
Here some pics of the resto process:
https://www.facebook.com/media/set/?...4884752&type=1
https://www.facebook.com/media/set/?...4884752&type=1
also bought there all the bolts and bed mounts.
Here some pics of the resto process:
https://www.facebook.com/media/set/?...4884752&type=1
https://www.facebook.com/media/set/?...4884752&type=1
Senior User
Joined: Apr 2011
Posts: 347
Likes: 7
From: San Jose, CA
you will find a lot of good info on the mar-k site, like this:
Wood Finish Testing - Testing of different wood finish products
Wood Finish Testing - Testing of different wood finish products
Lead Driver
Joined: Jul 2009
Posts: 6,477
Likes: 19
From: Sheffield, AL
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
The wood and strips were painted body color originally.
A stepside is a Chevrolet.
Thread
Thread Starter
Forum
Replies
Last Post
Hawkeye_Mike
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
15
Dec 13, 2007 09:12 PM
Rich
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Dec 10, 1999 06:45 AM
