hello fellow truck nuts.
I have a 67 f100 long bed that i am working on and I need a little help from the community. The front bed bolt holes were rusted out along with the front six inches of the bed floor. I replaced the front 8 inches of the bed floor and i also had to remove the front under bed cross brace due to rust. So I have lost the location of the front bed bolt holes and was wondering if anyone could measure their location from the front bed panel to the holes for me. I am also remaking the under bed brace and raising the bed floor five inches to give more room due to being lowered.
thanks for any info that you can give......