Wheels
Thread Starter
|
New User
Joined: Jul 2013
Posts: 10
Likes: 0
Wheels
Any Suggestions on where to find some original style steel wheels for a 54 f100? I currently have 16s on the front and 15s on the back looking for two 15s so I can order a set of white walls, also does anyone know the lug spacing?
Roast em' if you got 'em
Joined: Mar 2005
Posts: 21,972
Likes: 9,791
From: Rio Rancho, NM
The original lug spacing should be 5 on 5 1/2" spacing.
Ford trucks used the same 5 on 5 1/2" spacing on trucks and vans up through the mid 1990's. The big variations are in how the center hub cap attaches. Hopefully someone will come along who knows more about that than I do.
Good looking truck
Bobby
I almost forgot....Welcome to the board!!
Ford trucks used the same 5 on 5 1/2" spacing on trucks and vans up through the mid 1990's. The big variations are in how the center hub cap attaches. Hopefully someone will come along who knows more about that than I do.
Good looking truck
Bobby
I almost forgot....Welcome to the board!!
Marmon-Herrington Man
Joined: Jul 2005
Posts: 11,984
Likes: 444
From: Central Illinois
In the below Kelsey-Hayes diagrams you'll see that the hub cap nubs in the first picture are on the inner edge of the wheel center (K-H designation "R"), and in the second diagram the nubs are on the outer edge of the center (K-H designation "RB"). These are the "C" measurement. The "R" wheel is correct for your truck. On that wheel the "C" measurement is 8.092". The "RB" is a later wheel, and I find a few different Ford/Merc/Lincoln wheels having different "C" measurements on a 15" wheel having your 5 x 5.5" bolt pattern. A common figure looks to be 10.75", but don't spend any money based on that observation. Places like Summit and Coker sell new reproduction wheels like you are looking for. Stu
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
5 lug wheels on a 5.50" bolt circle:
1953/79 F100 / 1966/96 Bronco / 1969/74 E200 / 1975/96 F150 / 1975/2013 E100/150 / Some 1980/83 F100's.
Some 1980/83 F100's have 5 lug wheels on a 4.50" bolt circle.
1966: Last year for F100 "innie" wheels, so called because the hubcap snaps over tabs located on the inside of the wheels center section.
"Outies" so called because the hubcap snaps onto tabs located on the outside of the wheels center section.
F100 outie wheels were introduced in 1965, but some 1965/66's still came with innie wheels. 1967 and later, all are outies.
1953/79 F100 / 1966/96 Bronco / 1969/74 E200 / 1975/96 F150 / 1975/2013 E100/150 / Some 1980/83 F100's.
Some 1980/83 F100's have 5 lug wheels on a 4.50" bolt circle.
1966: Last year for F100 "innie" wheels, so called because the hubcap snaps over tabs located on the inside of the wheels center section.
"Outies" so called because the hubcap snaps onto tabs located on the outside of the wheels center section.
F100 outie wheels were introduced in 1965, but some 1965/66's still came with innie wheels. 1967 and later, all are outies.
Thread
Thread Starter
Forum
Replies
Last Post
EightGodzillas
1973 - 1979 F-100 & Larger F-Series Trucks
4
Dec 19, 2014 03:01 AM
Matt1966
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Jul 12, 2013 04:55 AM
es2rider
1961 - 1966 F-100 & Larger F-Series Trucks
20
Mar 12, 2010 08:25 AM
