BIG JOBS RULE!
#32
WANTED!
I am looking for two items. First- I need a good drivers side running board for an f700 - f900. Next- I am on the hunt for a good set of rear fenders from a fire truck body to use on my wrecker. Anybody have one of these stripped down and not being used?
Anybody have a line on any of these parts? Funny thing is, somebody somewhere ether had or has a whole bunch of these running boards. Do you know how many fire trucks I have looked under and found that the original running boards were removed when the fire body was installed? Who's got 'em??????????? Would be ashame to find out they were scrapped!
I am looking for two items. First- I need a good drivers side running board for an f700 - f900. Next- I am on the hunt for a good set of rear fenders from a fire truck body to use on my wrecker. Anybody have one of these stripped down and not being used?
Anybody have a line on any of these parts? Funny thing is, somebody somewhere ether had or has a whole bunch of these running boards. Do you know how many fire trucks I have looked under and found that the original running boards were removed when the fire body was installed? Who's got 'em??????????? Would be ashame to find out they were scrapped!
we have been using running board off later 1970s you have to trim about
an inch off the top (nobody will ever notice) sam
#35
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,161
Received 5,220 Likes
on
1,703 Posts
#37
The truck has been outfitted with a flatbed until I have time to construct the wrecker bed. It has been on the road since spring. I only drive it locally until I can insure the bugs are worked out. It is fun to drive. I will add a few additional photos to my album if you want to take a look.
#38
Chris,
Now that is a nice build on the temporary flat bed! Thanks for responding!
Wait! I have to wipe the drool marks off the screen!
Additional pictures of your truck during the build portion are always welcome too! The finished product sure looks nice.
I am just trying to learn a little bit about these big bad boys!
Regards,
Chris
Now that is a nice build on the temporary flat bed! Thanks for responding!
Wait! I have to wipe the drool marks off the screen!
Additional pictures of your truck during the build portion are always welcome too! The finished product sure looks nice.
I am just trying to learn a little bit about these big bad boys!
Regards,
Chris
#39
#40
No, they do look good. Only thing noticeable is the radius difference at the fender. I managed to doctor mine up enough to use them, after all, it's not a show queen and I step on them and scratch them up with my boots anyway. Looks like you have the same scoop on yours, just mounted different. What engine do you run, 312Y?
#41
No, they do look good. Only thing noticeable is the radius difference at the fender. I managed to doctor mine up enough to use them, after all, it's not a show queen and I step on them and scratch them up with my boots anyway. Looks like you have the same scoop on yours, just mounted different. What engine do you run, 312Y?
fender I say nobody will ever notice, unless they own one. sam
Thread
Thread Starter
Forum
Replies
Last Post
OldStyle
1948 - 1956 F1, F100 & Larger F-Series Trucks
9
05-28-2019 09:33 AM
shakyshot
1948 - 1956 F1, F100 & Larger F-Series Trucks
10
07-29-2015 07:35 AM
dschr
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
01-13-2005 10:56 AM