carb rebiuld
Thread Starter
|
New User
Joined: Nov 2013
Posts: 6
Likes: 0
carb rebiuld
hey guys im back to work on my 79 f100 long bed project now i cant get it to run i have narowed it down to the carburator but i have no idea how to work on the 2 barrel that is on my truck does anyone have some kind of diagram or instuction sheet if so i will be verry thankful
Fleet Owner
Joined: Dec 2009
Posts: 20,678
Likes: 82
From: NorCal
hey guys im back to work on my 79 f100 long bed project now i cant get it to run i have narowed it down to the carburator but i have no idea how to work on the 2 barrel that is on my truck does anyone have some kind of diagram or instuction sheet if so i will be verry thankful
If you've never worked on a carb before, at least first understand how it is supposed to work and take lots of digital pics during disassembly for reference.
Tools:
A gallon of Berryman Chem-tool or other compatible solvent.
Canned air if you don't have a compressor.
Rags and paper towels.
Clean and well lit work area.
Screw drivers, nut drivers, and picks.
Patience.
Take your time, don't lose any parts, and all will be fine.
.... keep dogs or cats away from you while working. They are typically very curious of what yer doing.
Thread
Thread Starter
Forum
Replies
Last Post
78bigunns
Fuel Injection, Carburetion & Fuel System
3
Aug 21, 2002 01:54 PM
