When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OK just one more question. Can I pull the end on/off **** off and put it on my old hub? A buddy of mine had one laying around and the one that's on my truck is much better condition but the end cap is broke
If they are the same exact hub then I would think you could, I would try with your old one first since it is already broke...
On second thought I just watched a video on how to repack the hubs with grease I think I may try cleaning up and repacking the one he gave me and see how it goes
Yes I just want this project to be over with! What a hassle! I installed a 10" lift on my 08 in less time than this is taking
Hang in there. There is definitely a learning curve. I just replaced the seals and hub assembly on my 2000 F250 and it took me most of a day to get it back together due to lots of little issues. Once together I realize I forgot the brake backing plate! It took me about 15 minutes to take it back apart and put it back together once I knew that I was doing.
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
It took me about 15 minutes to take it back apart and put it back together once I knew that I was doing.
