Assistance measures

Reply Subscribe

Thread Tools

Search this Thread

Nov 10, 2013 | 02:23 PM

capelo

Thread Starter

Elder User

Joined: Nov 2012

Posts: 568

Likes: 0

From: Asturias (España)

Assistance measures

Greetings, I need some help, I do the supports of the box, because I have now are very bad as it looks in the photo, as you can see has many holes and which are not original. so I need to know the measurements of the original, to make. I hope your help:

Nov 10, 2013 | 04:50 PM

ALBUQ F-1

Fleet Owner

Joined: Jul 2004

Posts: 27,300

Likes: 1,059

From: NM

Those appear to be the correct parts, they just look like swiss cheese. What measurements are you wanting, the spacing on the holes for the bed strip bolts?

Nov 11, 2013 | 03:45 PM

capelo

Thread Starter

Elder User

Joined: Nov 2012

Posts: 568

Likes: 0

From: Asturias (España)

Quote:

Originally Posted by ALBUQ F-1

Those appear to be the correct parts, they just look like swiss cheese. What measurements are you wanting, the spacing on the holes for the bed strip bolts?

thanks for the interest, I would like to know the dimensions of all necessary holes, I see some pictures but not the distances:

Nov 11, 2013 | 05:30 PM

bobbytnm

Roast em' if you got 'em

Joined: Mar 2005

Posts: 22,022

Likes: 9,975

From: Rio Rancho, NM

I thought I had some dimensions for those holes but I can't seem to find them anywhere.

If nothing else you might try contacting this company;
Mack Products: Home
I think they are the main manufacturer of those parts. Who knows, if you can get a hold of one of the techs maybe they will be able to give you some measurements

Good luck
Bobby

Nov 12, 2013 | 04:34 PM

capelo

Thread Starter

Elder User

Joined: Nov 2012

Posts: 568

Likes: 0

From: Asturias (España)

Quote:

Originally Posted by bobbytnm

thanks for the link, but I see hard to find in a solution, due to the language difference

Nov 12, 2013 | 07:49 PM

bobbytnm

Roast em' if you got 'em

Joined: Mar 2005

Posts: 22,022

Likes: 9,975

From: Rio Rancho, NM

I understand.
Here is another link to a bed part manufacturer;
How to contact MAR-K Quality Parts
You might have some luck emailing the technical department

http://www.mar-k.com/Catalog/PDF/Cat...ross_sills.pdf

In the meantime I'm going to start a new thread with a different title. I'm sure someone on here can get the measurements from their truck. They might just not understand what you are needing.

Bobby

Here is a link to the new thread;
https://www.ford-trucks.com/forums/1...ts-needed.html