Wiring.

Reply Subscribe

Thread Tools

Search this Thread

Nov 1, 2013 | 02:34 PM

Dodgeyaussie

Thread Starter

Mountain Pass

Joined: Feb 2011

Posts: 189

Likes: 24

From: San Francisco Bay Area

Wiring.

Hi All, long time no post...

I have a 1966 F250 Camper Special on which i am trying to resurrect the trailer wiring, which at the moment, is an epic clusterfvck.

Wondering if anyone has a wiring schematic?

Cheers..

Nov 1, 2013 | 04:08 PM

jowilker

Fleet Owner

Joined: Jun 1999

Posts: 24,552

Likes: 74

From: Creedmoor, North Carolina

It's only 3 wires, already at the rear of the truck. Get a circuit tester like this,

connect the ground to the chassis and poke the wires to ID them, should take 5-10 min. and you are done.

John

Nov 1, 2013 | 10:45 PM

Shadowrider123

Fleet Mechanic

Joined: Oct 2007

Posts: 1,973

Likes: 104

I need to rewire mine as well. The PO hacked the harness up when he added trailer wiring.

Nov 2, 2013 | 04:27 AM

jowilker

Fleet Owner

Joined: Jun 1999

Posts: 24,552

Likes: 74

From: Creedmoor, North Carolina

There is a factory connection just off the end of drivers side frame rail, you can start there or if you just gotta have more fun than that go to the cab.

As for me I'd clip and work in the mess area. Put new connectors and try to cover it all up good.

Wiring is not hard, but it is exact.

John

Nov 2, 2013 | 08:36 AM

Shadowrider123

Fleet Mechanic

Joined: Oct 2007

Posts: 1,973

Likes: 104

Im going from the connector.

Its easier to work at the bench than it is on my back under the truck.

Nov 2, 2013 | 09:37 AM

CropDusterMan

Elder User

Joined: May 2010

Posts: 957

Likes: 3

From: Valley Center, CA

The previous owner of my truck had done a real job on the brake light wiring too...I had a baseball sized
ball of electrical tape back there...I couldn't help but laugh as I undid it to find bare wires and a jumbled mess.