needing sct livewire ts guage recommendations please
#1
needing sct livewire ts guage recommendations please
Guys, I'd like to setup my livewire ts on the multi-guages display and let it do the thinking for me by flashing red when the set parameters are exceeded. Here's where I need help, please give me the most important guages to monitor and where to set the alarm limits. (For example, I will set one gauge for the EGT probe and have it flash at 1250*). I think there is display option for 9 gauges, so what are your recommendations?
FICM, boost, EOT, ECT, EGT, What else ya got??? min and max setting recommendations would be cool as well
FICM, boost, EOT, ECT, EGT, What else ya got??? min and max setting recommendations would be cool as well
#2
Guys, I'd like to setup my livewire ts on the multi-guages display and let it do the thinking for me by flashing red when the set parameters are exceeded. Here's where I need help, please give me the most important guages to monitor and where to set the alarm limits. (For example, I will set one gauge for the EGT probe and have it flash at 1250*). I think there is display option for 9 gauges, so what are your recommendations?
FICM, boost, EOT, ECT, EGT, What else ya got??? min and max setting recommendations would be cool as well
FICM, boost, EOT, ECT, EGT, What else ya got??? min and max setting recommendations would be cool as well
#3
I didn't see that gauge option. Will check it out Thanks. What parameters should I set the alarm for?
#4
Thread
Thread Starter
Forum
Replies
Last Post
05 f250 6 inch lift
6.0L Power Stroke Diesel
13
09-13-2010 01:12 PM
eric777
6.0L Power Stroke Diesel
11
08-22-2009 07:38 AM