351w Engine swap
Thread Starter
|
Senior User
Joined: Jun 2013
Posts: 255
Likes: 0
351w Engine swap
Hello guys i have a 1990 f250 with a ceased 351W and we recently bought a 1994 f250 with the 351w, and we are in the middle of doing the swap. I need to know what components i need to swap from the 1990's motor to make it fully compatible with the trucks wiring. Ive been told already that i will need to swap distributors, anything else? Thank you guys for your help and opinions.
Hotshot
Joined: May 2003
Posts: 11,141
Likes: 25
From: south louisiana
The 94 may have a roller cam in it. If it does, then you'll need to use the 94 distributor. Pull a valve cover, then one rocker arm, pull the pushrod out and measure it. The roller pushrods are about 7.5 inches long. Everything else should be the same.
Thread Starter
|
Senior User
Joined: Jun 2013
Posts: 255
Likes: 0
Yes it is a roller motor, and i was aware of the distributor change. Is there anything else that your aware of that will take modification to make the motor compatible?
Thread
Thread Starter
Forum
Replies
Last Post
1990-f250
1987 - 1996 F150 & Larger F-Series Trucks
2
Jul 9, 2013 08:26 PM
