Nebraska's official August BS thread
Thread Starter
|
Super Moderator
Joined: Dec 2005
Posts: 208,495
Likes: 410
From: Omaha/Elkhorn, NE
Good morning all, happy Tuesday! Another hot one today! I'm going out at 8:30, over across the river, and participate in our emergency siren test. Basically, I go out and make sure the siren works. Yeeha.
Butt soaking....Is this some kind of weird New York therapy thing? 
Postmaster
Joined: Oct 2007
Posts: 2,662
Likes: 0
From: Omaha, Ne
Good morning all, happy Tuesday! Another hot one today! I'm going out at 8:30, over across the river, and participate in our emergency siren test. Basically, I go out and make sure the siren works. Yeeha.
Butt soaking....Is this some kind of weird New York therapy thing?
Butt soaking....Is this some kind of weird New York therapy thing?
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
Maybe he meant to say he was gonna to take a shower?
Thread Starter
|
Super Moderator
Joined: Dec 2005
Posts: 208,495
Likes: 410
From: Omaha/Elkhorn, NE
Morning Phil, Charlie! I'll have my phone, so I'll check in from out there. Charlie, I'm taking the locking hubs apart on that 79. After getting the cap off (by drilling the heads off of the damn hex bolts, I got the lock ring off, and the lock assembly out. Then, got the first spanner ring threaded off. But, there is a ring in there, with a bunch of holes in it that I can get out. I thing it threads on to the spindle, but I can't figure out how to get the damn thing off!
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
Morning Phil, Charlie! I'll have my phone, so I'll check in from out there. Charlie, I'm taking the locking hubs apart on that 79. After getting the cap off (by drilling the heads off of the damn hex bolts, I got the lock ring off, and the lock assembly out. Then, got the first spanner ring threaded off. But, there is a ring in there, with a bunch of holes in it that I can get out. I thing it threads on to the spindle, but I can't figure out how to get the damn thing off!
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
What sucks, there are 3 of them.
You have a dana 44. You can go to advanced, or auto zone, tell them it's the socket to remove your wheel bearings on front hub. costa about $14.
I have several spares, but shipping would cost more than the tool
You need to go to Jeff's bronco graveyard, and get the mile maker hub kit when your ready to put it back together.
I did the 94 for $99
comes with a stainless steel hub, shims, and lock washers/nuts.
You still use the same tool you have to buy
Black takes a similar tool, but not the same one, so the answer to that question is NO
You have a dana 44. You can go to advanced, or auto zone, tell them it's the socket to remove your wheel bearings on front hub. costa about $14.
I have several spares, but shipping would cost more than the tool
You need to go to Jeff's bronco graveyard, and get the mile maker hub kit when your ready to put it back together.
I did the 94 for $99
comes with a stainless steel hub, shims, and lock washers/nuts.
You still use the same tool you have to buy
Black takes a similar tool, but not the same one, so the answer to that question is NO
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
Call me on the phone if you have a problem finding it at the parts store, I'll get you a part number off one here
Thread Starter
|
Super Moderator
Joined: Dec 2005
Posts: 208,495
Likes: 410
From: Omaha/Elkhorn, NE
Is it a big honking socket like deal? I have that if that's what your talking about. I just can't get that stupid ring with all of the holes out. I'll check out the pic here shortly, getting ready to leave here in about 5 minutes.
Posting Legend
Joined: Nov 2001
Posts: 36,506
Likes: 0
From: Grapevine, TX
Good morning Nebraska!
Tough job, but somebody's gotta do it, right Pat?
Oh wait, with that siren going off, Pat probably can't hear me...
HEY PAT, CAN YOU HEAR ME NOW???
Oh wait, with that siren going off, Pat probably can't hear me...
HEY PAT, CAN YOU HEAR ME NOW???