E4OD PROBLEM NO ONE TALKS ABOUT
Thread Starter
|
Junior User
Joined: Jun 2013
Posts: 53
Likes: 0
From: Ca. Desert S. of Barstow
UPDATE THE UPDATE: Okay I pull the trans. back and replaced the torque convertor. Reassembled and tested. Same error code 629. This error code is first to come up then code 11. Put trans. in D vehicle does not move. Shift to 2 then back to D and vehicle moves forward. Dropped pan and replaced the solenoid pack. Filled trans. Tested same results as before. Any help in here? I gotta be rolling by the 9th.
The Southernmost Mod
Joined: Dec 2004
Posts: 6,902
Likes: 20
From: Caracas, Venezuela
Get a Equus 3145 and pull the codes yourself, it can be done even with a paperclip if you don't mind counting light flashes. Since you have replaced the solenoid pack, which is basically the only electronic part of the trans, then you might want to check the wiring and the connector. Btw, how did you refill the trans.? did it at least take 12qts of ATF?.
P.S.: Code 11 means the truck passed all the other tests.
P.S.: Code 11 means the truck passed all the other tests.
Thread Starter
|
Junior User
Joined: Jun 2013
Posts: 53
Likes: 0
From: Ca. Desert S. of Barstow
pulled the codes still 629 cleared and pulled again 629. More like 15.62 quarts with the torque convertor which I added atf to prior to changing in new one. going to check yellow and pink wire I think that is the right one from trans connector to ecc. i think i will just run a new wire to see if code clears. about the driving 10 miles so the ecc can relearn think that could be my problem. after pulling trans out in out in I dont want to break it, 
Last edited by knotEdog; Jul 8, 2013 at 11:42 PM. Reason: forgot to ask about 10 mile thingy
Thread
Thread Starter
Forum
Replies
Last Post
GJStriker
1987 - 1996 F150 & Larger F-Series Trucks
1
Feb 15, 2004 01:13 AM
vanner
1987 - 1996 F150 & Larger F-Series Trucks
7
Mar 4, 2002 11:43 PM
