NAPA starter
Posting Guru
Joined: Aug 2010
Posts: 1,924
Likes: 0
From: knox Tn
Got a little tip for starter install , my bolts fell out the 12mm one the other one broke and the upper one was bent . So got new bolts and got a longer one for the 12mm one and a nut to go on the other end . now it threads into the starter and has a nut on the starter side all with red loctight . hopefully shouldn't back out now .
Fleet Owner
Joined: Apr 2012
Posts: 27,307
Likes: 549
From: Spanaway
The problem comes up when your in a parking lot at 7:55 PM and
the only auto parts store is closing in 5 minutes and no hardware
store in sight to get the needed heat to pop the red loose.
69cj is right blue would be a better option
Sean
the only auto parts store is closing in 5 minutes and no hardware
store in sight to get the needed heat to pop the red loose.
69cj is right blue would be a better option
Sean
Thread
Thread Starter
Forum
Replies
Last Post
