Brake light Issue
Thread Starter
|
Junior User
Joined: Dec 2012
Posts: 61
Likes: 0
Brake light Issue
I have a 1986 f250 4x4 with a 460 and a C6. I was recently informed that I did not have any brake lights or hazards lights in the back of the truck. First thing i check was the Fuses and they were all fine. I have rewire the grounds on the truck rear of the truck . the weird thing is the hazard lights work on the front of the truck and when i hit the brake pedal the hazards light in the front stop flashing and go to a solid light. i cant seem to figure out what the problem is. I am trying to find were the stop light and hazard light connect to each other. does anyone have any ideas on how i can fix this or ideas. anything would be great
Thanks.
Thanks.
Postmaster
Joined: Feb 2011
Posts: 3,560
Likes: 1
everything for the lights back there goes through the turn signal switch, so thats a logical place to start looking. do the turn signals themselves work? if yes, that proves the bulbs and wiring back there are good and still points toward the switch
Thread Starter
|
Junior User
Joined: Dec 2012
Posts: 61
Likes: 0
Yes the turn lights work. I will check it out tomorrow. Is there a connector that plugs in to engine bay from switch to go to the back of the truck or is there the only one that goes to the back just behind the bumper
Thread
Thread Starter
Forum
Replies
Last Post
pittdog1977
1967 - 1972 F-100 & Larger F-Series Trucks
9
Jun 3, 2014 09:53 AM
randy84
1973 - 1979 F-100 & Larger F-Series Trucks
5
Nov 22, 2011 07:20 PM
