P0272 code on startup after complete teardawn
Thread Starter
|
New User
Joined: Nov 2012
Posts: 21
Likes: 0
P0272 code on startup after complete teardawn
Finally got my 6.0 van started after 10 months(Had way too many things on my list above it) being down for leak in HPO system. The only things left in the block were the crank,pistons, and cam.
Once i got it started it has a miss and im getting a P0272 code for cylinder #4 Balance fault.
Could this be from the air in the HPO system?
Any help would be appreciated!
Once i got it started it has a miss and im getting a P0272 code for cylinder #4 Balance fault.
Could this be from the air in the HPO system?
Any help would be appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
Supercab
1999 - 2003 7.3L Power Stroke Diesel
4
Jun 3, 2010 04:37 AM
