what size socket?
Cargo Master
Joined: Apr 2009
Posts: 3,038
Likes: 4
From: South west Idaho
I second that , 1 1/8 self locking on the 79s i removed to put on my 73 which look to be the same size with the nut that uses a cotter key. Same end wrench will remove nuts on the bolt that holds the front to the axle . I'm removing all of the 73 f-100 front and replacing with 79 F-150 parts .
Cargo Master
Joined: Apr 2009
Posts: 3,038
Likes: 4
From: South west Idaho
I believe i used a 9/16 wrench to remove the small clamp at the top of the coil springs to release them from the spring top cap. Shocks may be 5/8 and 9/16 , i don't remember. Take a wire brush and lot's of panther XXXX.
I was thinking 76 came with disc ? My 73 has them . Is it 2 wheel or 4 wheel drive ?
I was thinking 76 came with disc ? My 73 has them . Is it 2 wheel or 4 wheel drive ?
Thread Starter
|
Junior User
Joined: May 2013
Posts: 57
Likes: 0
From: Bella Vista, Ar
Thanks for all the help
i am pulling the 76 front end for my 69 ranger
think i have all the tools i need besides that big 1 1/8
i am pulling the 76 front end for my 69 ranger
think i have all the tools i need besides that big 1 1/8
Trending Topics
Cargo Master
Joined: Apr 2009
Posts: 3,038
Likes: 4
From: South west Idaho
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Junior User
Joined: May 2013
Posts: 57
Likes: 0
From: Bella Vista, Ar
can i ask what you paid? this guy is going to charge me $300 for the front end and all the brake parts+ steering gear pitman arm. am i overpaying?
Cargo Master
Joined: Apr 2009
Posts: 3,038
Likes: 4
From: South west Idaho
I'm thinking the $300.00 is within reason since you are getting everything from the steering column joint to the ground . He should include the springs and shocks too even if you don't need them.
Thread Starter
|
Junior User
Joined: May 2013
Posts: 57
Likes: 0
From: Bella Vista, Ar
was a lot easier than i thought it would be. the proportioning valve attached to the steering gear. i thought they were located on the frame? i snagged the steering gear anyways 
i planned on replacing most the parts with new, but this thing is in really good shape. might just clean it up and slap it on.
i planned on replacing most the parts with new, but this thing is in really good shape. might just clean it up and slap it on.
Thread
Thread Starter
Forum
Replies
Last Post
mean351stang
1987 - 1996 F150 & Larger F-Series Trucks
8
Aug 10, 2023 06:04 PM
Mustangking1
1973 - 1979 F-100 & Larger F-Series Trucks
11
Dec 4, 2014 07:07 PM
RJCarp2
1987 - 1996 F150 & Larger F-Series Trucks
5
Jun 15, 2007 09:46 AM
