Flathead fuel pump
Thread Starter
|
Posting Guru
Joined: Sep 2004
Posts: 1,616
Likes: 3
From: Sapulpa OK
Flathead fuel pump
Have installed a Mustang fuel tank between the frame rails and am ready to get a rotary fuel pump, regulater and pickup/gauge mechanism. Has anybody sorted all this out and is willing to help e with this? I have converted to 12v and am using the stock carburetor. Stock gauges also.
Thanks for any help you may give.
Thanks for any help you may give.
Fleet Owner
Joined: Jul 2004
Posts: 27,298
Likes: 1,059
From: NM
I used an Airtex/Auto Zone #E8016S (Airtex E8016S - Electric Fuel Pump Assembly | O'Reilly Auto Parts), which is not a rotary. Carter also makes a decent pump (
) and I don't think it is rotary either. Both are rated to 4 - 4.5 psi output for carb'd vehicles.
Holley 94's like low pressure (2.0 - 2.5 max) and I don't know of any pumps that are that low. Use a quality regulator like the Holley 12-804 ( )
Holley 94's like low pressure (2.0 - 2.5 max) and I don't know of any pumps that are that low. Use a quality regulator like the Holley 12-804 ( )
Thread
Thread Starter
Forum
Replies
Last Post
whipple_ryan
Ford Inline Six, 200, 250, 4.9L / 300
1
Jul 28, 2009 08:44 AM
aaron_sk
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
Aug 19, 2008 10:44 PM
