drive shaft question
Thread Starter
|
Elder User
Joined: Jan 2006
Posts: 861
Likes: 1
drive shaft question
does any one know if the short shaft with the carrier bearing on it is longer on a 76 2wd than the 66 2wd tryibg to put a 76 c6 trans in my 66 but the tranny is about an inch and a half longer than the c4 thats in it now
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
The driveshaft center support assy (carrier bearing-D9TZ-4800-A) is a separate part, not part of driveshaft and is the same for all 1965/79 F100/250's and some F350's.
Driveshafts are different lengths due to different wheelbases.
Driveshafts are different lengths due to different wheelbases.
Senior User
Joined: Jan 2012
Posts: 185
Likes: 3
From: Andale,KS
Many moons ago i put a C6 behind a 302 in my 66 F100. I used a 1-piece drive shaft out of early 70's vintage trucks. I cant remember if i had to cut it or not?? That way you get rid of the carrier bearing.
Thread
Thread Starter
Forum
Replies
Last Post
Tex51
1967 - 1972 F-100 & Larger F-Series Trucks
4
Oct 10, 2018 10:01 AM
jeffscott01
1948 - 1956 F1, F100 & Larger F-Series Trucks
12
Nov 13, 2012 10:41 AM
judi48
Clutch, Transmission, Differential, Axle & Transfer Case
2
Jan 12, 2008 12:21 PM
long&low65
Clutch, Transmission, Differential, Axle & Transfer Case
7
May 16, 2007 02:37 AM
78f250lj
1973 - 1979 F-100 & Larger F-Series Trucks
4
Aug 2, 2004 05:17 PM
