What Is The Recipe For Stroker///////
Thread Starter
|
Senior User
Joined: Jun 2003
Posts: 156
Likes: 0
From: Cranbrook,BC Canada
What Is The Recipe For Stroker///////
HELLO;
I WAS DOING SOME RESEARCH ON THESE 351 STROKERS AND THIS IS NEAR AS BEST TO WHAT I CAN FIGURE FOR A RECIPE;
STOCK CRANK,GROUND TO 3.85 THROW
STOCK RODS FROM THE SAME 351
302 PISTONS
AM I RIGHT OR WRONG?? I REALLY WANNA DO ONE OF THESE,BUT I AM NOT SURE ON ALL YOU HAVE TO DO OR WHAT IS NEEDED FOR THE PARTS.I RACE ON A 3/8 PAVED OVAL AND HAVE A SMOGGER 84 WINDSOR IN IT RIGHT NOW,AND LOOKING FOR MORE PULL OUT OF THE TURNS AND GOOD STRAIGHTAWAY SPEED.
GONNA RUN A SET OF 3.70'S FOR GEARS,SO I DO BELIEVE THIS WILL FIT THE ORDER.ANY HELP WOULD BE IMMENSELY APPRECIATED.
THANKS FOR ANY REPLIES
PS.....I HAVE HEARD OF GUYS RUNNING CHEVY PISTONS IN THESE THINGS.........ANY TRUTH TO IT?
I WAS DOING SOME RESEARCH ON THESE 351 STROKERS AND THIS IS NEAR AS BEST TO WHAT I CAN FIGURE FOR A RECIPE;
STOCK CRANK,GROUND TO 3.85 THROW
STOCK RODS FROM THE SAME 351
302 PISTONS
AM I RIGHT OR WRONG?? I REALLY WANNA DO ONE OF THESE,BUT I AM NOT SURE ON ALL YOU HAVE TO DO OR WHAT IS NEEDED FOR THE PARTS.I RACE ON A 3/8 PAVED OVAL AND HAVE A SMOGGER 84 WINDSOR IN IT RIGHT NOW,AND LOOKING FOR MORE PULL OUT OF THE TURNS AND GOOD STRAIGHTAWAY SPEED.
GONNA RUN A SET OF 3.70'S FOR GEARS,SO I DO BELIEVE THIS WILL FIT THE ORDER.ANY HELP WOULD BE IMMENSELY APPRECIATED.
THANKS FOR ANY REPLIES
PS.....I HAVE HEARD OF GUYS RUNNING CHEVY PISTONS IN THESE THINGS.........ANY TRUTH TO IT?
Thread
Thread Starter
Forum
Replies
Last Post
rhino3
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
2
Aug 18, 2005 07:50 AM
Nightrain
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
Feb 7, 2004 05:50 PM
jesse460
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
Oct 14, 2002 11:10 PM
