keyless start
Thread Starter
|
New User
Joined: Jan 2013
Posts: 13
Likes: 0
keyless start
I have a 1990 f150 xlt lariat and i pu tin a momentary switch for my starter due to the mechanism inside the steering column going bad. I would like to use a basic on/ off switch to power the vehicle. I dont know what the amps are and what color wire/wires i use to do this. I do know howi to wwire it. Ri@ght now im turning the key to on and push start and go.
Last edited by shabby14; Mar 21, 2013 at 06:36 PM. Reason: spelling
Post Fiend
Joined: Apr 2004
Posts: 6,473
Likes: 4
From: Lafayette, IN
I bet your actuator broke. It's about a $10-15 part, and it's not too difficult to replace. Remove the shrouds on the steering column, take out the ignition switch, tilt the wheel down and then there might be a couple pins you have to remove. It's been about 12 years since I had to do it. I drove a week with the shrouds off and using a screwdriver to poke the actuator on top of the column (the actual momentary switch is center top, about an inch or two behind where the top of the column goes under the dash) with the ignition switch on to start the truck--also a '90 F150 XLT Lariat.
Jason
Jason
Postmaster
Joined: Aug 2005
Posts: 4,728
Likes: 8
From: Cleveland, TN
That will just make it easier for some nut to "borrow" it...
Junior User
Joined: Aug 2011
Posts: 84
Likes: 0
Just fix it, its cheaper, easier, and will not cause your insurance to drop you if it gets "borrowed"...
Trending Topics
Logistics Pro
Joined: Jul 2009
Posts: 3,635
Likes: 3
From: Lansdale, PA
There is nothing wrong with wanting a racecar starting setup if you live in a redneck town and never lock your cars or houses.
But what about your steering lock. Are you gonna just leave the key in ignition. Because if not... You'll be using the key every time anyway to unlock that.
You'll need a switch with a few terminals on it. Probably need a relay to handle all the current from the two 10ga wires under there that control everything, and then there must be 6-8 other wires to deal with.
The key is nice to have so that you're not energizing the whole truck ignition and pump, when all you want is the radio.
Keep the key, fix it, or continue to use it as is. There is no reason to hack the wiring in your truck.
But what about your steering lock. Are you gonna just leave the key in ignition. Because if not... You'll be using the key every time anyway to unlock that.
You'll need a switch with a few terminals on it. Probably need a relay to handle all the current from the two 10ga wires under there that control everything, and then there must be 6-8 other wires to deal with.
The key is nice to have so that you're not energizing the whole truck ignition and pump, when all you want is the radio.
Keep the key, fix it, or continue to use it as is. There is no reason to hack the wiring in your truck.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
Thread
Thread Starter
Forum
Replies
Last Post
MUSKRATT2
Brakes, Steering, Suspension, Tires, & Wheels
2
Sep 15, 2009 07:05 AM
kill_them_all
Electrical Systems/Wiring
2
Dec 22, 2004 10:14 PM
