When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have the replacement pins cuz my door sags but am confused at to the best way to go about this. Anyone done this before? Whats going to be the fastest way for me to get these pins in and the old ones out!
I used a dremmel tool to cut the old pin and a chisel/punch on the old bushings. I used a 5 gal bucket and some towels underneath the door to hold it up. The challenge was getting the new bushings in.