tach power

Reply Subscribe

Thread Tools

Search this Thread

May 30, 2003 | 10:21 AM

SouthPCraz

Thread Starter

Junior User

Joined: Jun 2002

Posts: 67

Likes: 0

From: SpringfieldMissouri

tach power

where should i run the power on my tach to on my 1978 bronco?

May 30, 2003 | 11:28 AM

steve83

Post Fiend

Joined: Nov 2002

Posts: 9,987

Likes: 7

From: Memphis, TN

tach power

Look in the Haynes manual to see where the OE tach got its power, or wait a few minutes and Dennis (Mil1ion) will probably post a diagram.

May 30, 2003 | 02:26 PM

Dan76'F100

Junior User

Joined: Apr 2003

Posts: 97

Likes: 0

From: North Florida

tach power

I got my tach power from the red wire on the duraspark module
and my tach signal from the green wire...
Funny, the red hooked to the red, and the green hooked to the green, not that difficult

Gotta love these trucks

May 31, 2003 | 12:22 PM

SouthPCraz

Thread Starter

Junior User

Joined: Jun 2002

Posts: 67

Likes: 0

From: SpringfieldMissouri

tach power

well i was thinking of running it to the fuse box but i dont know what to run it to then i figured id just run it to the battery, but im going to have two amp power cables running to that in the future so im just not sure where to run the power to