68 F100
Thread Starter
|
Senior User
Joined: Jan 2005
Posts: 123
Likes: 1
From: Mine Hill NJ
68 F100
Hi folks,
Its been a few years since I posted. Life had kinda got in the way as it does.
My project was put on the back burner after our house burned. I still have my project truck in the works and am hoping to start work again in the coming spring.
I was wondering if anyone has any line or Blueprint drawings of the 1968 F100?
Had an idea to marry the front end of a 68 Shelby Mustang with my F100. The 360 FE for my F100 was half finished being stroked out to a 407 (390 / crank & pistons with 428 connecting rods) when I ran into a problem with the crank. Turns out the internal threads on the front end were damaged and while installing the pistons and turning the crank with a ratchet they let go. everything was turning no problem but I figured my options were to just Helicoil the crank or get another 390 crank. Its a simple fix either way.
Anyway if someone has the blueprint/line drawing i'd appreciate if you could post them here.
Thanks
John
Its been a few years since I posted. Life had kinda got in the way as it does.
My project was put on the back burner after our house burned. I still have my project truck in the works and am hoping to start work again in the coming spring.
I was wondering if anyone has any line or Blueprint drawings of the 1968 F100?
Had an idea to marry the front end of a 68 Shelby Mustang with my F100. The 360 FE for my F100 was half finished being stroked out to a 407 (390 / crank & pistons with 428 connecting rods) when I ran into a problem with the crank. Turns out the internal threads on the front end were damaged and while installing the pistons and turning the crank with a ratchet they let go. everything was turning no problem but I figured my options were to just Helicoil the crank or get another 390 crank. Its a simple fix either way.
Anyway if someone has the blueprint/line drawing i'd appreciate if you could post them here.
Thanks
John
Fleet Owner
Joined: Dec 2009
Posts: 20,678
Likes: 82
From: NorCal
I think a fun question for imagineering is to ask yourself, "What would Carroll Shelby have done with a Bumpside?
Or to be more contemporary, "What would Jack Roush do?
Thread
Thread Starter
Forum
Replies
Last Post
Putty
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
Aug 12, 2017 04:08 PM
blacburn10
1961 - 1966 F-100 & Larger F-Series Trucks
7
Oct 22, 2014 07:01 PM
427 fordman
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
Jan 22, 2011 01:22 PM
ClodsFe
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
Feb 9, 2004 02:02 PM
