rocker shaft question
Thread Starter
|
Senior User
Joined: Apr 2012
Posts: 131
Likes: 0
rocker shaft question
i was wondering if there is an issue with using harlond sharp roller rockers on sealed power non roller rocker shafts, ill be using pop spacers, stands, and end supports. here is the cam from lunati. they said it would be a 562/574 with 1.76 rockers
edel heads
Advertised Duration (Int/Exh): 268/276
Duration @ .050 (Int/Exh): 227/233
Gross Valve Lift (Int/Exh): .552/.564
LSA/ICL: 110/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 1600-5800
edel heads
Advertised Duration (Int/Exh): 268/276
Duration @ .050 (Int/Exh): 227/233
Gross Valve Lift (Int/Exh): .552/.564
LSA/ICL: 110/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 1600-5800
Thread
Thread Starter
Forum
Replies
Last Post
theguy_88
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Feb 26, 2006 04:30 PM
dennyjr47
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
7
Sep 3, 2004 08:44 PM
bigblockhead
1973 - 1979 F-100 & Larger F-Series Trucks
6
Mar 18, 2000 08:56 PM
