When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I probably wont get nothing, i usually just care about getting the kids some stuff
Sounds like you've been at the "Dad Game" for some time now. Good for you, heart is in the right place.
I'm single and don't have any kids, this is why I always get myself something for Christmas. It usually ends up being something for the truck though, lol!
Jason, good luck with the injector cup job. I don't know if you have done it before, but when you think you have the bores clean, clean them again! My M.O. was to do a final clean of each bore with acetone right before I put in each cup. I mean, put the sealant on the cup, clean the bore again, and slam that cup in there. The rear bores were still seeping a little oil even after sitting for days with the rail plugs out. I found that those little foam "paddles" for painting trim worked GREAT for cleaning the bores, and the acetone didn't attack them.
It's worthwhile doing a pressure test too, once you have them all installed. That's how I knew I had to do it OVER
Thanks, its not my first time - but I'll take all the advice I can get. There is still a minimal chance something MUCH easier than cups is my problem, so my fingers are crossed...
Originally Posted by Tugly
Uh oh... Bad Santa. Is the picture reversed?
LOL! This ain't no reverse-rotation turbo. I have moved past that limitation!!
It will make more sense when I get the next package. More pics to come...
Besides, Santa has very little to do with the operation these days - its all run by elves and supercomputers using sites like Amazon/Ebay/etc... Luckily, the North Pole is not affected by obamacare - so the jolly fella's operation is not in danger of suffering the same fate as our beloved Twinkie.
I was a bad person today.. I ordered my ISSPRO gauges last night. I guess it will be a Thanksgiving present to myself! Now next I will wait for the MBRP 4''
We're gonna roll out Dec. 27th for our annual Gatlinburg/Pigeon Forge after Christmas trip. We will be towing our TT I-40 west from central NC..we're coming back on Sunday the 30th..
Well if my eye surgury goes ok Wed . On Dec 1st I will be off to Panama City for a month and then on to Ocala for the rest of the winter. Will be pullin my fiver with the 6637 mod for the first time and kind of curious how she's gonna do!
A box with Yellow tape should be arriving at my place end of this month to the beginning of December. I will finally have a complete set of boots and clamps from Clay!
Already got'em on the bottom, just need to get the top side fixed up...
I'll be making a run or two to San Antonio to meet up with my good buddy TXtinct and whoever else from the area wants to join.
Check out the lights around the Hill Country, pretty cool. River walk (SA) is pretty awesome at Christmas also.