comp cams 31-255-5 question. need help
Thread Starter
|
Senior User
Joined: Mar 2010
Posts: 263
Likes: 0
comp cams 31-255-5 question. need help
hello guys, so ive just dropped comps 31-255-5 into my trucks engine. i have also installed the hydraulic lifters and a new timing chain. my question is, am i ok with just replacing the hydraulic lifters with the new cam? meaning can i use the stock rocker arms and valve springs?
any advice would be much appreciated
any advice would be much appreciated
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Yes no problem with stock pushrods, rockers, and valve springs with that cam. Be sure to use all the breakin fluid and grease supplied with the cam and also some zinc additive to the oil if possible.
Thread
Thread Starter
Forum
Replies
Last Post
704 dentside man
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
4
Jun 13, 2010 02:37 PM
mudracin74
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
37
Jun 3, 2006 09:58 PM
jambroson
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
Mar 11, 2004 02:51 AM
51truck
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jul 30, 2003 12:03 PM
