APC Module
Thread Starter
|
Senior User
Joined: Feb 2011
Posts: 153
Likes: 0
APC Module
Ok So i just bought a 99 F350 and it has the APC Module installed. The previous owner said that it worked for the five years he had it and that you could start the truck and after a few seconds it will idle up. I have gone through the instructions a million times and still can not get it to do anything. Powers up fine, If I press either RPM Control or charge protect the light next to it will blink and then it does nothing. The charge protect blinks for a few seconds shows 9.4v and then turns off. The RPM Control will blink for a few seconds shows 1175 and then stay solid while it goes back to current RPM. no matter what I do it will not idle up. Any information would be greatly appreciated. Also just as a side note, Trans is in Park, Emergency brake is on, foot is off the brake.
Thread Starter
|
Senior User
Joined: Feb 2011
Posts: 153
Likes: 0
Auxiliary Powertrain Control Module (APC) Module
I used these directions:
APCM - Introduction - 1994-1997 Power Stroke FAQ
I used these directions:
APCM - Introduction - 1994-1997 Power Stroke FAQ
Thread Starter
|
Senior User
Joined: Feb 2011
Posts: 153
Likes: 0
The E Brake Light does not come on when the Brake is applied. I guess ill have to start chasing that problem 
Im not sure what happened a fe minutes ago but i pressed the oval button and the RPM's went up to the preset 1740 for about 5 seconds then went back down. not sure how i did it but it wont do it again LOL. Ill check out the e brake light tomorrow
Im not sure what happened a fe minutes ago but i pressed the oval button and the RPM's went up to the preset 1740 for about 5 seconds then went back down. not sure how i did it but it wont do it again LOL. Ill check out the e brake light tomorrow
Have a nice Beer!!!
Joined: Nov 2006
Posts: 5,024
Likes: 1
From: WA Resident
Auxiliary Powertrain Control Module (APC) Module
I used these directions:
APCM - Introduction - 1994-1997 Power Stroke FAQ
I used these directions:
APCM - Introduction - 1994-1997 Power Stroke FAQ
Thread Starter
|
Senior User
Joined: Feb 2011
Posts: 153
Likes: 0
I just noticed the years in the link. it is the same all the way to 2003. I have the original instructions here on paper.
Trending Topics
Mountain Pass
Joined: Apr 2010
Posts: 178
Likes: 2
From: Northeast, WA
The switch for the e brake light grounds to turn it on. The connector is aluminium and gets dirty and won't make good contact. You will see the spot where it grounds when you look at it. Easy fix.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Post Fiend
Joined: Sep 2003
Posts: 6,096
Likes: 26
From: Mesa AZ
The E Brake Light does not come on when the Brake is applied. I guess ill have to start chasing that problem Im not sure what happened a fe minutes ago but i pressed the oval button and the RPM's went up to the preset 1740 for about 5 seconds then went back down. not sure how i did it but it wont do it again LOL. Ill check out the e brake light tomorrow
Im not sure what happened a fe minutes ago but i pressed the oval button and the RPM's went up to the preset 1740 for about 5 seconds then went back down. not sure how i did it but it wont do it again LOL. Ill check out the e brake light tomorrow
Thread
Thread Starter
Forum
Replies
Last Post
Major Marvin
1994.5 - 1997 7.3L Power Stroke Diesel
3
Sep 14, 2011 10:09 AM
picardn
1999 - 2003 7.3L Power Stroke Diesel
9
Apr 22, 2010 11:15 AM
