Hi, Newbie here. OTR trucker on vacation with a broken oil cooler on my 1987 6.9L International diesel. I'm looking for International part # 1805849C1. this is the rear casting for the oil cooler and has the oil filter spin-on nipple.
This is the "low profile" oil cooler used on many 1 ton vans and some p.u.'s I guess.
Any help would GREATLY be appreciated. I'm currently sitting in a truck stop in Spokane, WA. The truck stop folks are great. Cant say much about the IH dealer though....
I'm not a good blogger but can be contacted at espiritusengineering@yahoo.com
espiritus engineering at yahoo dot com.

 

According to car-parts.com it looks as if the closest parts are either in Chehalis of Hermiston or Lewiston.

1987
Oil Cooler
Ford Truck 250 PULLED IN CAB OF TRUCK A 011706 $100 Torgerson's Wrecking, Inc. USA-WA(Chehalis) E-mail 800-647-7898 / 360-262-9051

1987
Oil Cooler
Ford Truck 250 110824 $90 Bert's Auto Salvage LLC USA-OR(Hermiston) E-mail 1-800-854-1455

1987
Oil Cooler
Ford Truck F250 6.9L DL2467 $85 D and L Truck Parts USA-OR(Junction-City) Request_Quote 1-800-231-2603 Request_Insurance_Quote


http://www.car-part.com/

 

Dear SMSgt:
Thanx for the sources. I will call them today. The exact item I need can be found by GOOGLE "TinyAutos 1805849C1". there are several perfect photos of the NEW, In-The-Box item....already sold of course.
Got anything like that in the garage or shed???
Semper Paratus.
Bob

 

Coastie?

It's just Master Sergeant.......well, was anyway, before I hung up the uniform.

Best of luck on getting the parts.

 

I-5 Auto & Truck Parts
190 Estep Road Chehalis, WA 98532‎
(360) 262-3550
There on this side of the BIG HILL aka : Mount Rainier
You might give them a call. I bet that they could put it on
the bus and get it to you or over night UPS/FedEx.
Wished I could help more. If you were on this side I could at least
drive you.

Sean

 

It's be a real pretty drive through Morton. US-12 is always awesome on a crisp fall day.

 

Dear MSsgt:
Thanx for the quick source referals. I called all three yesterday. And every one of them had a part. Unfortunately the parts they had were 6C1's and i need a 9C1. The difference is cooler bundle height. The 6C1 off-sets the cooler bundle vertically at an angle about 2 to 3 inches. This runs the cooler bundle into my exhaust manifold. The 9C1 unit goes straight across.
If you Google "TinyAutos 1805849C1" there are several nice pictures of the needed item and its easy to tell the difference between the two types of coolers.
Unfortunately that one has already been sold.
Nice pictures though.

 

Did they put it on the parts locater for you ?

Sean

 

No, they never mentioned being able to do that.....
All three had the 6C1 units, usually found on P.U.'s. All three were surprised to find out that there was more than one kind/model.
It would be difficult to keep abreast of all parts for all vehicles.

 

Call one them back and let them know that you
want them to put it on the parts locator.

Sean