2004 LOW POWER PLEASE HELP
Thread Starter
|
Freshman User
Joined: Mar 2012
Posts: 35
Likes: 0
Wow i'm so glad tO hear that. I have figured out the problem I think. I ran a hpop test with a friends computer except this time I tested it with the truck at normal running temp. I feel stupid for just thinking of it, but it seems to only drop pressure when engine exceeds about 140 degrees. (oil temp was 156ish) I was
Hotshot
Joined: Apr 2010
Posts: 19,060
Likes: 238
From: Saratoga Springs,UT
I dont think your issue would be the type that running it would hurt or make things worse
take your operating values how i posted in post #17
that applies to all sensors/valves
Post ICP & IPR% & Baro & MAP & EBP
take your operating values how i posted in post #17
that applies to all sensors/valves
Post ICP & IPR% & Baro & MAP & EBP
Thread Starter
|
Freshman User
Joined: Mar 2012
Posts: 35
Likes: 0
Hey guys, sorry I have been so slow replying lately. I have been swamped. I was never able to get the results for "blades", but I did find the problem and the truck is running great now! Even though It may not seem like it, y'all REALLY helped me allot! I can't thank you enough! The problem was the electric fuel pump under the driver on the frame. It had corroded so bad it ruined the pump!?! It was only making 10 PSI!
What causes this to happen?
What causes this to happen?
Thread
Thread Starter
Forum
Replies
Last Post
