Evap system won't reset
Thread Starter
|
New User
Joined: Aug 2012
Posts: 2
Likes: 0
Evap system won't reset
Hello out there. I am not a professional mechanic but I consider myself pretty handy. I do almost all the work on my 1997 Expedition. It has a 5.4 liter V8. I recently had a check engine light on. I have the software and plug to link it to my laptop. I fixed the code issue. It was a P0171, turned out to be a PCV tube that was crack on both elbows. Simple right? I wish. Now the Evap system wont reset. I have the fuel tank at between 1/2 and 3/4 full. I drove down the road at exactly 65 mph for about 20 miles. 10 miles away, got off highway and then 10 miles back. I did my best to avoid hills and sharp turns. My gas cap is clean and relatively new. What next? I just want to register my car.
Some one help me please!!!
Daren
Some one help me please!!!
Daren
Hotshot
Joined: Jan 2004
Posts: 19,760
Likes: 1,079
From: St Louis
Drive it normally for a week and check it. The EVAP test will run in its own due course. Keep the tank between 1/4 and 3/4 full in the meantime.
FWIW, most locales permit one or two "Incomplete" monitors so you might be banging your head against the wall unnecessarily. Check with your local testing authority.
FWIW, most locales permit one or two "Incomplete" monitors so you might be banging your head against the wall unnecessarily. Check with your local testing authority.
Thread
Thread Starter
Forum
Replies
Last Post
mkboger
1997 - 2006 Expedition & Navigator
7
Jan 13, 2009 08:46 AM
masterbeavis
1987 - 1996 F150 & Larger F-Series Trucks
62
Dec 17, 2007 07:46 PM
