Hidden ignition switch

Reply Subscribe

Thread Tools

Search this Thread

Jul 9, 2012 | 01:29 AM

78ford4x4Bigred

Thread Starter

New User

Joined: Jul 2012

Posts: 20

Likes: 0

Hidden ignition switch

I was thinking of putting in a hidden toggle switch that needs to be flipped on before the truck can be turned on.

Was jut going to tap into it behind the dash. I assume one of the wires coming out of the keys ignition would work. Any ideas which one??

Jul 9, 2012 | 02:16 AM

LITTLE BLACK TRUCK

Senior User

Joined: Jun 2012

Posts: 290

Likes: 1

From: Southern Ohio

If you unplug the switch there should be abbreviations on the inside of the plug. I assume the one that says IGN is the ignition. I dont know if all of em have this but mine does.

Jul 9, 2012 | 04:22 PM

bighatchy

Senior User

Joined: Nov 2011

Posts: 124

Likes: 0

I have a switch tapped into my neutral safety switch

Jul 9, 2012 | 04:30 PM

400inatruck

Senior User

Joined: May 2011

Posts: 398

Likes: 0

From: Wrights community

Like the above post, I have one running through my neutral safety switch. Easiest thing there is to do with the wiring on these trucks.

Jul 9, 2012 | 04:47 PM

crsweet78

Elder User

Joined: Sep 2010

Posts: 604

Likes: 4

From: Antioch, CA

My alarm has a built in starter disengage. The module controls a relay that I wired into the wire that runs to the solenoid. As long as the system is armed, the ignition is killed by the relay.