GC Wiring Issues
Thread Starter
|
Senior User
Joined: Feb 2008
Posts: 237
Likes: 0
GC Wiring Issues
Just noticed says GC in the title, should be GV.
Today I replaced the old corroded button on the floor with a on/off style toggle switch I put on the dash. After going for a drive, nothing worked on the GV, so I swapped the old button back and its still not working. It flashed real quick when I start the truck, but nothing else from the dash switch. I have plans to be driving down to FL tomorrow night with the tuck, and need this thing working. So worst case scenario I'm just going to wire a 12v wire to the solenoid to control it for the next week and deal with the other stuff when I get back. Does anyone know which terminal on the solenoid should be + and which one -, or does it matter? Or any help on fixing the floor switch.
Today I replaced the old corroded button on the floor with a on/off style toggle switch I put on the dash. After going for a drive, nothing worked on the GV, so I swapped the old button back and its still not working. It flashed real quick when I start the truck, but nothing else from the dash switch. I have plans to be driving down to FL tomorrow night with the tuck, and need this thing working. So worst case scenario I'm just going to wire a 12v wire to the solenoid to control it for the next week and deal with the other stuff when I get back. Does anyone know which terminal on the solenoid should be + and which one -, or does it matter? Or any help on fixing the floor switch.
Last edited by 02X72; Jun 30, 2012 at 11:15 PM. Reason: Title Wrong
Thread
Thread Starter
Forum
Replies
Last Post
jhaas63
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Jul 29, 2013 04:02 AM
jimbo beam
1987 - 1996 F150 & Larger F-Series Trucks
8
Aug 10, 2007 04:34 PM
Sycostang67
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
Jul 1, 2007 12:24 PM
Meh!
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
8
Dec 1, 2005 07:06 PM
